easy wood projects
While Im tapering the holes for the legs in my shavehorse bench I might as well make the the tapering plane. I found plans for one in Drew Langsners Chairmakers Workshop. I went to a lumber yard today that specializes in hardwoods and got a cut off block. I laid out the lines for the center hole. and drilled it with my brace and bit. Next I will use my tapered saw blade reamer to make the taper for the tapering plane. They will be a matched pair.
Maple block approximately 3"x3"x9"
Laid out the center mark to drill. Two inches from the end and the middle of the block.
3/4 inch bit.
Brace and bit starting the auger.
Keeping the bit going true.
Poked through the bottom.
Finish drilling hole through bottom for a clean un splintered hole.
Starting to taper the hole with my tapered saw reamer.
Do you find information about easy wood projects are you looking for? If not, below may help you find more information about the easy wood projects. Thank you for visiting, have a nice day.
0 komentar:
Posting Komentar