easy wood projects
This is Part 6 of a series that starts here
Gluing the large door stumped me for a while, as I tried to figure out the order of gluing the parts together.
Because there is a center stile (vertical piece) and that piece has tenons on each end, I have to glue that center stile into the top and bottom before I put the two outer side stiles on.
After much thought, this is the order I glued the pieces together.
First I glued the two right-side rails to the center stile as seen here in red:
Then I glued the two left-side rails to the center stile as seen in blue:
This was really getting unwieldy and my clamps were not long enough, but I hooked a few together to get the parts glued.
The next step was to glue the top and bottom rails on, seen here in green:
Now, I could slide in the panel pieces to one side as I did with the three smaller doors:
And then glue on one side stile as seen in orange:
After this, I glue the other side in the same way. I dont have any photos of this door in glue-up mode, most likely because it was a big struggle and I was frustrated. But anyway, it worked out well.
Phew!!
Next I will hinge and hang the doors!
Do you find information about easy wood projects are you looking for? If not, below may help you find more information about the easy wood projects. Thank you for visiting, have a nice day.
0 komentar:
Posting Komentar