easy wood projects
I cant tell you how happy I am to have my lumber rack in place in my new workshop. I made the lumber rack for my old shop in May of 2010. I blogged about how to make it HERE.
I had to shorten it to fit in the ceilings, so I cut some off the top of each section. I then found the studs behind the wall. This was a bit tricky because there is a layer of drywall and under that some horizontal slats that the drywall was attached to. Then under those slats is a plaster wall, so a layer of plaster and slats for that. But because the wall backs up to the basement stairs, I could find the studs by seeing where the drywall beside the stairs was attached to the studs. I bought 5" long lag screws so that I could get through all the layers and pre-drilled to make sure I hit wood.
I took off the piece of baseboard I had recently put on so that I could sit the uprights on the floor. Then I cut the baseboard into pieces to fit between.
I had boards all over the place, so it was good to get them on to this rack and out of my way. I still have some wood to go on here, but its behind other things, so I havent reached it yet!
This is how the rack looked in my old workshop after being loaded with a new purchase of pine:
On another note, today is the second birthday of my little Chihuahua, Denver. Officially known as "Knockout Colorado Kid," Denver is a little bundle of joy!
Do you find information about easy wood projects are you looking for? If not, below may help you find more information about the easy wood projects. Thank you for visiting, have a nice day.
0 komentar:
Posting Komentar